Well am too having the same problem. The issue seems
to be due to address translation the PIX does. The
actual address on the firewall interface(outside) is
different & the secure remote client uses different IP
(IP mapped by PIX) to establish the session. But I
don't understand why authentication fails.
In my case topology dowload goes through, but
authentication fails. If i sit behind PIX everything
is fine. PIX is trnslating Public IP to Private IP.
Let me know if you get to know why this happens.
thanks.
--- [EMAIL PROTECTED] wrote:
>
>
>
> HEI
>
> I hope someone could help me with a big problem Ive
> got.
> My client needs to use securemot ipsec program
> through a pix firewall to a
> firewall1 at the remote sight.
> theres no problem to get key exchange process, and I
> am beeing prompted for
> password and username.
> after this the program says the authentication is
> OK, but explorer comes up with
> cannot find the page.
> When I test the same procedure connected without the
> pix everything functions
> OK.
> Could anyone please give me a tip to solve this
> situation.
>
> Thank you
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
