tftp the software to the PIX again, and at the end you'll be prompted if
you'd like to enter a new key.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
""Dietmar Prantner"" <[EMAIL PROTECTED]> wrote in message
000c01c0860f$b75fe380$[EMAIL PROTECTED]">news:000c01c0860f$b75fe380$[EMAIL PROTECTED]...
> Hi there,
>
> I've got a Pix 506 to play with and wanted to configure some
> IPSEC-Settings... The PIX told me that it needs an activation key...
>
> I ordered the key through the web-form and when I received it I wanted to
> activate it...
>
> As the Pix was already in use without activation key I was not prompted
for
> a new key anymore. In the Cisco-documentation i read that there is no
> command to change the activation key and that I have to install a new
> Software to the Pix to activate the key...
>
> I tried to download new software but I was not allowed to - so could
someone
> please tell me how to change the activation key without having another
> software-package?
>
> best regards
> Dietmar Prantner
>
> ([EMAIL PROTECTED])
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
