OK I get all the VPN stuff for IPSec. I have a working PIX-PIX VPN working
right now and am in the process of implementing CiscoSecure to PIX VPN. I
haven't implemented it quite yet because I"m worried about a possible
conflict here.
Configuring IKE Mode Config parameters calls for the following:
ip local pool (pool-name) ip-range
isakmp cilent cnofiguration address-pool local (pool-name) outside
crypto map (crypto-map-name) client configuration address initiate
The first 2 lines have a common pool-name but have no places in there to
match it to previous commands set up for the specific VPN. All others in my
config have some reference either by a name or a number in the command.
The 3rd line also has no reference whatsoever to which VPN this should
apply. There are no similar commands for the PIX-PIX vpn but I'm wondering
if this will somehow interfere or am I just being overly cautious here?
Allen May
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
