Hi,
Wouldn't a roll over cable between both do a similar job. Of course this would not
allow you to set up a dialer number but it should allow you to bring up the ports, do
login sequence checks and pass data between both afterall it is only an asynch to
asych connection as long as the txd -> rxd, dsr - dtr and gnd match the rest should be
fine.
Teunis
Hobart, Tasmania
Australia
On Saturday, February 03, 2001 at 04:40:53 PM, Pierre-Alex wrote:
> Hi all,
>
> I have a Cisco 4000 and a Cisco 2503
>
> IS IT POSSIBLE to connect the aux ports of both routers to simulate DDR?
>
> What I have read seems to me that I would need 2 modems to accomplish this.
> But I may be wrong?
>
> Thanks
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
