Go to rom monitor mode by press ctrl+break. Change config register to 2142.
so that it boot up ignoring NVRAM. then reboot change your startup config
and save
""Sisqo"" <[EMAIL PROTECTED]> wrote in message
95nova$irp$[EMAIL PROTECTED]">news:95nova$irp$[EMAIL PROTECTED]...
> on line console 0, I added the 'no exec time-out' command. thereafter, it
> freeze then I couldn't do anything but power cycled the router. I can see
> it reboot but still freezes on me with no keyboard input capability. This
> is a 2501, my line connection is on it's console port. Before I did this,
I
> was able to have keyboard input. Any help would be appreciated.
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
