I've used the following which (a year or so ago) was the cheapest setup I
could find....
>From APC get the following parts:
Triple expansion chassis (it's rack mountable)
SNMP card
Temp and Humidity Card (also has 4 inputs for switches)
Put the 2 cards into the chassis, configure the SNMP card (which also has
web and telnet abilities) and you have a system. You do not need anything
else (such as an APC UPS)... With the contact inputs you can monitor
everything from the closet doors to alarm outputs on other equipment...
I can't take credit for the system as I stumbled on a posting describing the
setup and tried it out...
Perhaps there is something cheaper on the market now but I couldn't find
anything a teay or so ago. I needed the contact inputs more than the temp
and humidity....
Bob
-----Original Message-----
From: Jim Newton [mailto:[EMAIL PROTECTED]]
Sent: Monday, February 12, 2001 10:43 AM
To: [EMAIL PROTECTED]
Subject: environmental device
I am looking for a device that will monitor environmental conditions in a
data center or LAN closet that is SNMP pollable.
Any leads would be appreciated
[EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
