I can't seem to bring up the protocol on my 2 routers. A 2503 (DTE) and a
1005(DCE w/ clockrate of 64000) connected via crossover serial. Here are the
serial interfaces configs..
Cisco 1005
interface Serail0
ip address 192.0.0.2 255.255.255.0
encap ppp
bandwidth 64
Cisco 2503
interface Serial0
ip address 192.0.0.1 255.255.255.0
encap ppp
bandwidth 64
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
