=== start ==========================
Quick question: The "copper" cable that connects to both the Fast Ethernet
and the Gigabit Ethernet NICs to a switch is the same. It must be the
pin-outs on the individual NIC families that are pinned differently... Does
this sound reasonable?
Fast Ethernet Standard:
100BaseTX is CAT 5 set as 2 wire pairs
Gigabit Ethernet Standard:
1000BaseT is Cat 5 and 4 wire pairs
=== finish =========================
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
