Sorry for being vague before
I tested this in the lab and it works great for password recovery. Problem
is however that the client tried this and now the display is garbled. My
test was on the same router - no problems.
Is it possible for the hardware to be damaged???
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group
* +27 11 800 9467
* +27 11 800 9496
* +27 83 656 7214
* [EMAIL PROTECTED]
OR [EMAIL PROTECTED]
"This message may contain information which is confidential and subject to
legal privilege. If you are not the intended recipient, you may not peruse,
use, disseminate, distribute or copy this message. If you have received
this message in error, please notify the sender immediately by email,
facsimile or telephone and return and/or destroy the original message."
> -----Original Message-----
> From: Andrew Larkins
> Sent: 27 February 2001 12:21
> To: 'Cisco Mail List'
> Subject: Config register 0x142 - what speed does this change the port
> to??
>
> All help appreciated
>
> Thanks
>
>
> Andrew Larkins
> BCom, CCNA, CCDA
> Bytes Technology Group
> * +27 11 800 9467
> * +27 11 800 9496
> * +27 83 656 7214
> * [EMAIL PROTECTED]
> OR [EMAIL PROTECTED]
>
>
> "This message may contain information which is confidential and subject to
> legal privilege. If you are not the intended recipient, you may not
> peruse, use, disseminate, distribute or copy this message. If you have
> received this message in error, please notify the sender immediately by
> email, facsimile or telephone and return and/or destroy the original
> message."
>
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
