hi,
this problem is very common. FXO does not detect the disconnect
condition so cisco on FXO side keeps ringing after you hangup.
Newer FXOs have battery reversal feature. I didn't work with them and
don't know if they are any good.
The typical workaround is to set up the answering mashine to pick up the
calls when nobody's home. Works just fine.
All best wishes,
/felis
Hu Shenghai wrote:
>
> Hi,
>
> Did somebody face the problem with voice gateway
> (2600) with incoming CO trunk to FXO and Station with
> FXS.
>
> PSTN line in FXO port ring at FXS port in the same
> router. Disconnect problem with FXO
>
> Senario:
> UserA calls from PSTN to FXO port. PLAR FXS phone
> rings. Nobody pick up the ringing PLAR phone. UserA
> hangs up.
>
> Problem:
> The PLAR extension keeps on ringing even though userA
> already hang up.
>
> Thanks
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
