I hope that you have got the null modem cable , if you don't please get that and connect that to the WAN port on both of the routers , one of it will be DCE on which the clock rate has to be configured and the other will act as a DTE for simulation purpose , assign the IP address to both of the interface and try to ping at each other and at any other interface . thats it , all the best . Navin Parwal "Mixa" wrote in message <97jjo0$t5u$[EMAIL PROTECTED]>... >Hello, > >I'm new to Cisco and just bought 2 2500Series routers to practice my CCNA. >Could you please show me how to make 2 routers talk via a back to back >cable? > >Thanks in advance! > >Mixa > >PS: I know I need to configure a DTE/DCE but I can't find where. > > > > > > > >_________________________________ >FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
