What cables are you using? I had this problem recently and after getting
BTAC support involved we discovered that you need a "NULL" modem cable to
connect your PC/laptop to the 9 pin console port of your 1900 switch. It
took 3 CCIE's, a CCNP, two service reps, a service technician and a wannabe
before we discovered the answer. The third CCIE finally came up with the
solution.
David Toalson
816-701-4142
> ----------
> From: Charles Paver[SMTP:[EMAIL PROTECTED]]
> Reply To: Charles Paver
> Sent: Wednesday, February 28, 2001 8:23 PM
> To: [EMAIL PROTECTED]
> Subject: 1900 switch
>
> Hi--I cant hyperterminal into my new 1900 series
> switch! I changed the baud rate to 9600, and left all
> the same, but still no dice! Also, I changed the flow
> control to hware, to none...and I cant get on.
> Also,Im using nt ws, as well as windows 98. Same
> error every time--weird characters across the screen.
> such as atx0h0
>
> its weird...
> any ideas?
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
