This sounds like incompatible or bad memory. Your right, with the boot =
ROMs out of the way it should be smooth sail'n. The older 2500 =
motherboards required 70ns RAM & the newer ones require 60ns. You may =
have an newer motherboard & an slower RAM. Swap it around within your =
batch of 2500's. You may be able to get another router to run that =
speed & using it's RAM stick to possibly fix the router in question. =20
All the best
Phil
"Ken W. Alger" <[EMAIL PROTECTED]> wrote in message =
97tusp$tp5$[EMAIL PROTECTED]">news:97tusp$tp5$[EMAIL PROTECTED]...
> The boot proms are ver 11.0(10c)xB2, which I got from TAC about three =
months
> ago. My other routers are at the same boot prom level and can =
recognize 8MB
> RAM or higher. Any other thoughts?
>=20
>=20
> ""John Hardman"" <[EMAIL PROTECTED]> wrote in message
> 97sitm$ab1$[EMAIL PROTECTED]">news:97sitm$ab1$[EMAIL PROTECTED]...
> > Hi
> >
> > Chances are pretty good that your boot proms do not recognize the =
newer
> > flash. Call TAC and order new ones, they are free plus shipping.
> >
> > HTH
> > --
> > John Hardman CCNP MCSE+I
> >
> >
> > ""Ken W. Alger"" <[EMAIL PROTECTED]> wrote in message
> > 97sf8d$6eg$[EMAIL PROTECTED]">news:97sf8d$6eg$[EMAIL PROTECTED]...
> > > I have a 2505, IOS 10.2(6) which I am attempting to add more Flash =
RAM
> to
> > in
> > > order to run a more current IOS. I purchased an 8 MB chip, but =
when I
> > > install it and boot the router up I get the following error that =
doesn't
> > > occur with the current 4 MB chip:
> > >
> > > ERR: Invalid chip id 0x80B5(reversed: 0x1AD) detected in system =
flash
> > >
> > > Any ideas as to what this means as I have not encountered this one
> before.
> > >
> > > Thanks,
> > > Ken
> > >
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to =
[EMAIL PROTECTED]
> > >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to =
[EMAIL PROTECTED]
> >
>=20
>=20
> _________________________________
> FAQ, list archives, and subscription info: =
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
