Hi Brian,
I remeber going to a BCMSN class and the instructor saying that some
of those console cables actually use staright-through cables. I dont know if
it will work in your case, but its worth the shot.
Santosh Koshy
""Foulks, Brian, CTR"" <[EMAIL PROTECTED]> wrote in
message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Help,
>
> I just purchased a Cat 1201 and am trying desperately to connect via
> hyperterm to the admin port. I am getting no display, but the power-up
diag
> shows no problems. I went to Cisco's website and they say to use a
standard
> console cable with a DB9. I have that and have swapped it out with
another
> as well. I have played with the hyperterm's settings and even went as far
> as reset the box via the jumpers. All to no avail. What am I missing?
Any
> suggestions would be greatly appreciated.
>
> Thank you,
>
> Brian
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
