Rizzo,
I think its possible, following would be your topology
LAN-----switch-----Ciscorouter-----eth-----dsl modem----------dsl cloud
( make sure you have to turn ON bridging on
both
ethernet interface of router )
I am assuming you are using PPPoE client software on the PC. PPPoE send
Ethernet broadcast which needs to reach to PPPoE server unless you dont turn
bridging on at routers traffic wont pass & it will fail.
thanks
rahul.
----- Original Message -----
From: "Rizzo Damian" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, March 06, 2001 7:22 AM
Subject: DSL internet with PPPoE
> I have a home lab with a few routers and switches, I have a permanent DSL
> connection but unfortunately they use PPPoE for authentication. Is there
any
> way possible I can use this connection with a Cisco Router??? I'd like to
> plug the modem into my router and then route traffic from there. But can't
> seem to get past the PPPoE problem. Thanks for the help.
>
>
>
>
>
>
> Damian Rizzo
> Senior IT Engineer
> Marakon Associates
> 203-978-6341
> [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
