J,
First, you need to know what configuration file is being used. If you
don't know, use "ps -ef | grep tac". (it might be ps -aux, I always
get my solaris and linux mixed up) Once you know what the config
file is, you need to understand the syntax.
If the tacacs version your using is the standard Cisco freeware,
there should be a text file called users_guide in the directory where
the file was unzipped. This will tell you just about everything you
need to know to interpret the config file.
If you can't find the users_guide file, just download a current tacacs
tar file from the Cisco ftp site at ftp-eng.cisco.com/pub/tacacs and
you can find it there.
HTH,
Kent
On 4 Mar 2001, at 21:20, joshandlaura wrote:
> Hello everyone,
>
> I have a question regarding TACACS+. I have a server up and
> running
> already but I've been having trouble administering the box
> (adding/deleting users, changing passwords, etc...it's a Dell PC
> w/128m and Red Hat 7.0. It runs like a champ but I would like some
> better understanding on how TACACS+ server is built up, because our
> Network Engineer was "let go" I inherited the box. I have tried to
> find some strait-forward answers/configs on the web but haven't seen
> anything remotely directional. I can give more info if anyone would
> like to take a shot at it...
>
>
> J. Way
> Network Technician, CCNA
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html Report misconduct and
> Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
