Hi Chris access server (2509/2511) and the octopus cable (for dial and using as terminal server) ethernet switch (2924XL, or even a small Cat5000, or both to configure ISL, 802.1q, spanning tree, and VTP) cisco 4000 with 4 serial interfaces to simulate a frame relay 'cloud' (configuration available on Cisco's UniverCD IOS documentation pages) DTE to DTE cables appropriate for connecting the 2501 and 2610 to the 4000 WIC-1T for the 2610 2 2503's so you can do ISDN BRI to BRI 2 NT-1's ATM interfaces would be helpful too, but that equipment is still pretty expensive :-( others will have additions/deletions, but that would be my wish list good luck! -e- "Christopher Kolp" <[EMAIL PROTECTED]> wrote: > I'm currently building a CCNP lab.. > > Any suggestions on what to get that I will > be able to use on the CCIE as well, without > going overboard. > > I've currently got a 2501 and a 2610. > > Any help would be much appreciated! > > > > Sincerely, > > Chris Kolp, CCNA > Systems Engineer > Neuron Broadcasting Technologies > > _________________________________ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ____________________________________________________________________ Get free email and a permanent address at http://www.netaddress.com/?N=1 _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
