This really depends on whether your telco requires 7, 10, or 11 digit
dialing. Try all 3, use debugging on the isdn until you are successful.
Bri
On Tue, 13 Mar 2001, Tomasiewicz, Mike (CC-WAN Services) wrote:
> Yep. Lookin' at one of our configs right now ...
>
> -----Original Message-----
> From: Alex Lee [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, March 13, 2001 3:47 PM
> To: [EMAIL PROTECTED]
> Subject: Re: frame-relay backup with ISDN
>
>
> Hi group,
>
> We are going to setup an isdn BRI backup between two sites located in two
> different states.
>
> In my dialer map ip command do I need to add '1' in front of the 10-digit
> phone number (area code + phone # ), e.g.
>
> dialer map ip 172.16.12.1 name HQ broadcast 1+area code+phone number
>
>
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
