I've upgraded the 3600's a time or two & cannot remember them being any
different than other Cisco router (in this arena). Copy TFTP FLASH will
prompt you to erase FLASH before copying. If you decline & there is room
for 2 images- no big deal. If you decline & there is not room for 2 images,
the process will fail. #Erase ? should reveal the Erase FLASH command (in
Privileged mode). The Erase FLASH works if you want to do everything on
your own terms, but the router should prompt everything...
Have I covered your question ???
Good Luck
Phil
----- Original Message -----
From: "John Neiberger" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, March 16, 2001 4:51 PM
Subject: Re: Deleting an image from flash
> You'll want to double-check this, but you should be able to issue the
> copy commands to get the new image and then specify to erase the
> existing flash first. Since the 3640 runs IOS from RAM, you don't have
> to worry about the contents of flash memory unless the thing reboots for
> some reason.
>
> Like I said, check the docs on CCO first, but I've been through this
> process on a 2600 and had no problems.
>
> John
>
> >>> "Roberts, Timothy" <[EMAIL PROTECTED]> 3/16/01 11:07:41
> AM >>>
>
> I have a 3640 that I need to load a new image on. I need to delete and
> old
> image from the internal flash. What commands do I need to use to do
> this.
> I have issued the delete command and it is now specified as [deleted]
> but I
> do not have the space available. It appears that there is no squeeze
> command available. It is running 12.0.7T.
>
> Would the commands on a 7100 series be the same as the 3640?
> Thanks
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
