Unfortunately, Doyle gives about the best description I have thus read. If
I recall, Bruce Caslow hits this a little in his book too.
I have just posted an answer to a thread that gives one use of IP classless.
Once you begin your quest of CCIE, you will encounter this in such a way it
is unavoidable. Until then, forget about it unless you are running an old
DV routing protocol at work.
----- Original Message -----
From: Bill <[EMAIL PROTECTED]>
To: Cisco Group Study <[EMAIL PROTECTED]>
Sent: Saturday, March 17, 2001 9:22 PM
Subject: classless behaviour
> Hi,
>
> To configure classless behaviour, we use "ip subnet-zero" and "ip
classless".
> I never understand them, even after reading Doyle's bible.
>
> * When do we need them ?
> * If we don't use them, what will happen ?
> * Is there good example to show their effect ?
>
> Thank you in advance.
>
> Bill
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
