I use a DL360 dual PIII with 1Gig Ram and 2x18.1 scsi hd and a gig card. Runs great. -----Original Message----- From: Rossetti, Stan [mailto:[EMAIL PROTECTED]] Sent: Monday, March 19, 2001 2:29 PM To: '[EMAIL PROTECTED]' Subject: CiscoWorks Hardware Need to Operate Efficiently Anybody have any recommendation for the hardware for a CiscoWork2000 server (NT). I am currently using a 500MHz processor, 512MB memory and 12 GB skuzzy drive, but it still takes 5 minutes for the initial load. The NT statistics show the memory is flat lined at 100% and processor utilization is about 60%. I have over 2GB of swap space setup. The PC I am currently using was originally a workstation. =20 Thanks Stan Rossetti NASA - PriSMS Advanced Technology Group Voice: (256) 544-5031 Email: [EMAIL PROTECTED] Beeper: 544-1183 pin 0112 CCDA, CCNA, CCSE _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
