Hi Group,
This has been nagging at me for about a week now.
I have 2 x 2500 routers connected via serial cables.
S0 -> S0 and S1 -> S1. I have a PC connected to one
router and my Laptop to the other.
The fast-switching cache is enabled on the four serial
interfaces and hence per/destination load balancing.
However, per/dest load balancing is only taking place
in the forward path to the PC. On the return path I
can see per/packet i.e S0/S1/S0/S1 taking place.
Why should this be ?
PS : I can reproduce this effect by pinging from the
Workstation to the Laptop also.
using debug ip packet. and cleared serial counters to
verify debug results.
I wonder if it is something to do with Ping not using
a transport. I'll just try an FTP to check.
Regards,
Phil.
____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
