Hi,
Yes there is caching 'sh ipx cache'
The main commands to view IPX are:
show ipx servers (this shows the networks and SAP's)
show ipx route (this shows the routes networks to interface)
show ipx interface ## (show the IPX options on interfaces)
show ipx traffic (give useful detail on the routing traffic)
Show ipx cache (I have only used to confirm where stuff is going.)
Just some ideas.
Teunis
Hobart, Tasmania
Australia
On Monday, March 19, 2001 at 05:54:14 PM, Bradley J. Wilson wrote:
> The command "no ipx routing" will clear up *all* your troubles. ;-)
>
> BJ
>
> ----- Original Message -----
> From: Nabil Fares
> To: [EMAIL PROTECTED]
> Sent: Monday, March 19, 2001 5:32 PM
> Subject: IPX Help
>
>
> Greetings all,
>
> I'm trying to find out how routers treat IPX traffic, is there any type of
> switching or optimization taking place. I hope my questions is clear!
>
> Thanks,
>
> Nabil
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
