I have setup a hub and spoke scenario with OSPF. What am I doing wrong?
I can not get the spokes to talk to each other unless I create a dlci =
on
the frame switch...
Config of interfaces below.
Ken
=20
Hub:
interface Serial0.100 multipoint
ip address 133.20.33.1 255.255.255.0
no ip route-cache
ip ospf network point-to-multipoint
ip ospf hello-interval 10
ip ospf priority 90
no ip mroute-cache
frame-relay interface-dlci 100
frame-relay interface-dlci 102
router ospf 1
network 133.20.33.1 0.0.0.0 area 0
=20
Spoke 1
interface Serial0
ip address 133.20.33.2 255.255.255.0
encapsulation frame-relay
ip ospf network broadcast
ip ospf priority 0
no fair-queue
frame-relay interface-dlci 101
frame-relay interface-dlci 105
frame-relay lmi-type ansi
router ospf 1
network 133.20.33.2 0.0.0.0 area 0
=20
Spoke 2
interface Serial0
ip address 133.20.33.3 255.255.255.0
encapsulation frame-relay
ip ospf network broadcast
ip ospf priority 0
frame-relay interface-dlci 103
frame-relay lmi-type ansi
router ospf 1
network 133.20.33.3 0.0.0.0 area 0
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
