That is correct assuming that the Port Speed and CIR for both T-1s it the
same. If it is not, you will have to use the "variance" command to
compensate for this.
Chris Lemagie
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Rizzo Damian
Sent: Wednesday, March 21, 2001 12:54 PM
To: '[EMAIL PROTECTED]'
Subject: Load Balancing with EIGRP
Were currently using EIGRP as our routing protocol and we now have two
separate T1 connections that were running Frame-relay on. If my
understanding of EIGRP is correct, then I shouldn't have to make any
modifications to the router in order for load balancing to take effect
correct?
Thanks!
-Rizzo
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
