I've got an unusual problem with my PIX 515.
I've configured the inside interface correctly, and can ping hosts on the
internal network. I've configured the outside interface correctly (as far
as ip addresses go) and can ping anywhere on the internet.
I've configured the router (to the internet) as the default route of the
pix...and the pix as the default gateway of the hosts on the internal
network.
I've also used the conduit permit icmp any any
command so that i can ping in and out of the firewall...
When I try to ping anywhere on the internet from the firewall it
works...also when i try to ping the internal network it works...
When i try to ping the pix from a host it works...when i try to ping the
router (to the internet) from a host it works...(meaning it goes through the
pix to the router fine)
however, when i try to ping anywhere on the internet (including the next hop
from the router) it doesn't work...i can't get passed the router...it just
dead ends there...
i checked to make sure that the subnet mask on the pix is right...and its
fine...
any ideas?
Thanks,
Brent
CCNP, CCDA, MCSE, MCP+I, etc.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
