Okay, I've searched every nook and cranny I could think of and could
find no mention of the existence of the "network" keyword in that
command. Weird. You'd think it would be mentioned at least once
somewhere! Or maybe *I* should learn to search CCO better. <g>
I even looked through the Open Forum Q&A lists and didn't see anything
there. That's a tough one. Maybe you should post that question on that
forum and see if someone answers. That's assuming they even get to
those questions this year. They seem to be pretty slow about answering
those.
Good luck,
John the Still Slightly Embarrassed
>>> "John Neiberger" <[EMAIL PROTECTED]> 3/23/01 4:14:32 PM
>>>
See what happens when my smart a** side gets the best of me?? This
always happens!
Hmm... I'll send myself into a corner with the Doc CD to research
that
one. For some reason it's ringing a bell, but that's probably only
because the "static" form of the command is familiar. I'll let you
know if I discover anything.
Thanks,
John the Gently Reprimanded
>>> "Michael Snyder" <[EMAIL PROTECTED]> 3/23/01 3:57:00 PM >>>
Might want to backup there John, Even try it on your router, IP NAT
INSIDE
SOURCE STATIC "NETWORK" is a real command, but it's not on the master
index.
IP NAT INSIDE SOURCE STATIC A.B.C.D is.
Try again.
""John Neiberger"" <[EMAIL PROTECTED]> wrote in message
sabb6e34.016@fsutil01">news:sabb6e34.016@fsutil01...
> If I were you I'd learn to use the documentation CD better before
you
> attempt the lab! <g>
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121mindx/ind
ex.htm
>
>
> I'm teasing, but I'm serious. I haven't taken it but I've heard
that
> the ability to quickly find information such as this will save your
hide
> during the lab exam. When you're pressed for time that irritating
> search feature is even more useless than it usually is.
>
> HTH,
> John
>
> p.s. Sorry if I came across as a smart a**. That's not
intentional,
> it's just my nature. ;-)
>
> >>> "Michael Snyder" <[EMAIL PROTECTED]> 3/23/01 2:53:44 PM >>>
> Anyone know what 'IP NAT INSIDE SOURCE STATIC NETWORK (INSIDE LOCAL
> NETWORK)
> (INSIDE GLOBAL NETWORK) SUBMASk' does?
>
> There's no documentation on CCO to how to use it.
>
> I was trying to map a 8.0.0.0/8 network (one to one, both
directions)
> to a
> 9.0.0.0/8 network via Nat.
>
>
> For example, ping 9.0.0.1 and 8.0.0.1 replies.
>
> Any idea on a easy way to do this? I tried the ip nat pool match
host,
> but
> the mappings seem to only to be active one way.
>
> Any sample configs will appreciated.
>
>
>
>
>
> --
> Michael Snyder
> NOC Engineer
> CCNP-Security, MCSE, CCIE-Written
> [EMAIL PROTECTED]
> ICQ#17424414
>
> WAMS
> 273 E. Hacienda Ave
> Campbell, CA 95008
> (408) 341-3041
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
