Hi All - Is it possible to run "routing on a stick" on an regular ethernet interface, not fastethernet??? I loaded IOS version 12.1.7 onto the 2611 and I could create subinterface on its ethernet ports. I could also encapsulate these subinterfaces to 802.1q and assign IP addresses for them. It seems I am able to do the routing on a stick here. However, when I tried it on a 2500 router with the same IOS version, I could only create the subinterface, but the encapsulation. There's no encapsulation command on the subinterface mode this time. Does this new IOS version not support this feature on 2500 series? or it allows me to successfully create and encapsuate subinterface on 2611, but the routing will never work if I plug in a CAT3500 switch? I am just experiencing if this method is working with Ethernet interface, because they said version 12.0T supports 802.1q encapsulation on Ethernet media.... Thanks All in advance! _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
