Thanks, I'll try that and let you know
On a sidenote, when I can successfully ping the other side, is it the frame
relay switch that's helping to resolve the ip to the dlci configured on the
switch with the #frame-relay route command?
Regards,
[EMAIL PROTECTED]
>From: "Mask Of Zorro" <[EMAIL PROTECTED]>
>Reply-To: "Mask Of Zorro" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED], [EMAIL PROTECTED]
>Subject: Re: Cannot ping own serial int. in a FR lab env??
>Date: Mon, 26 Mar 2001 10:36:11 -0500
>
>Run some frame-relay debugging while trying to ping your own serial
>interface. You will see an "encapsulation failed" message... The trouble is
>that Frame-Relay, being a layer 2 technology, needs to have a way to
>translate the IP address of your serial interface (a layer 3 entity) to a
>layer 2 address (DLCI).
>
>Configure a "frame-relay map ip (IP address of local serial int) (dlci)" on
>the interface and it will work... You need to do the same on the other
>side.
>
>I hope this helps...
>
>Z
>
> >From: "Niraj Palikhey" <[EMAIL PROTECTED]>
> >Reply-To: "Niraj Palikhey" <[EMAIL PROTECTED]>
> >To: [EMAIL PROTECTED], [EMAIL PROTECTED]
> >Subject: Cannot ping own serial int. in a FR lab env??
> >Date: Mon, 26 Mar 2001 07:20:39 -0500
> >
> ><html><DIV>Hi,</DIV>
> ><DIV>I have setup 3 2501 routers for FR and cannot figure out why I
>am
> >NOT able to ping my own serial int.(10.1.1.1) but can ping the other
> >router(10.1.1.2) through the frame relay switch. I face the same problem
> >from the other side too. I setup additional 3 router configs. to verify
> >this and I have the same problem. Is this only in a lab environment or am
>I
> >missing something? Please advise. Thank you.</DIV>
> ><DIV>Sincerely,</DIV>
> ><DIV>[EMAIL PROTECTED]</DIV><br clear=all><hr>Get your FREE
> >download of MSN Explorer at <a
> >href="http://explorer.msn.com">http://explorer.msn.com</a><br></p></html>
> >
> >_________________________________
> >FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
