I have a similar problem, but it's the other way around (sorta)...
I added a 4M flash chip to a 2500 that originally had only 8M. But after
the upgrade, "show version" shows there are 16M, not 12M. Also, I can not
copy an IOS version that's larger than 12M to the flash, so that shows the
added chip is indeed only 4M.
Is there something I need to do so it shows the correct size of the flash?
ROM upgrade?
Thanks,
Rog
> -----Original Message-----
> From: John Chang [mailto:[EMAIL PROTECTED]]
> Sent: Monday, March 26, 2001 10:25 PM
> To: [EMAIL PROTECTED]
> Subject: 2500 Flash ?
>
>
> I have a 2504 and I put in a 8MB flash but when it starts up
> it says it's a
> 4MB flash. Is there something I need to do so that it sees it
> correctly? Thank you.
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
