We are running a Network management platform based on the NETCOOL = package.=20 We have recently started to receive SNMP from one of our routers (Cisco 7500) with a summary of "Free_Huge Buffer is very low; less than 10%".=20 If we need too, we can filter these errors out but I am unwilling to do = this unless there is a justifiable reason to do so, and I have a greater understanding of what is occurring (this is not currently impacting = network performance). I am unable to locate anything on the Cisco site apart from the buffer = size varies dependant on demand (the buffer parameters have not been = adjusted). I was wondering if any of you out there had either seen this before or = have any additional information as to the possible cause. Thanks in advance for your help. Some additional Info detailed below IOS Version 11.1(22)CA 20480K bytes on flash 8192K internal Chassis Interface. 2 VIP2 controllers (1 FastEthernet)(1 ATM). 1 FastEthernet/IEEE 802.3 interface(s) 1 ATM network interface(s) 123K bytes of non-volatile configuration memory. 20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K). 8192K bytes of Flash internal SIMM (Sector size 256K). No slave installed in slot 3. Configuration register is 0x102 Regards _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
