Your Internet accessable Ip that you are using on the PIX.... Is this
global address a single address? Probably it is... once again, you can't do
IPsec through PAT (many to one nat) Try assigning that station that needs
to VPN a static addres on the public side.
Moe.
-----Original Message-----
From: Ragavendran K Rao (CTS)
To: '[EMAIL PROTECTED]'
Sent: 3/30/2001 5:57 AM
Subject: 3DES through PIX
experts,
i have got an access VPN connection to be configured to connect one of
the
VPN switches. i have got a pix, which is configured to translate the
inside
ip address to a internet routable ip address. but for the NAT function,
the
PIX does not do anything relating to ipsec. the cisco client we are
using
using 3DES whereas my PIX IOS is not enabled for 3DES. but as i said,
the
PIX is just passing whatever traffic to the internet. now, this
conneciton
does not go through.
what could be the reason ? do i have to necessarily enable 3DES on PIX ?
cheers,
This e-mail and any files transmitted with it are for the sole use of
the intended recipient(s) and may contain confidential and privileged
information.
If you are not the intended recipient, please contact the sender by
reply e-mail and destroy all copies of the original message.
Any unauthorised review, use, disclosure, dissemination, forwarding,
printing or copying of this email or any action taken in reliance on
this e-mail is strictly
prohibited and may be unlawful.
Visit us at http://www.cognizant.com
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
