I don't see any error in the output here, except that only 6 lines out of 16
show up on the display
flash upgrade probably failed because
1. this 2511 is using VERY old boot rom
2. operator error (that's always a possibility)
3. perhaps there wasn't enough room in the flash for the image... there's
only 8Mbytes of flash on this here 2511 so unless a compression utility is
used, the larger images will fail on download.
"RamG" <[EMAIL PROTECTED]> wrote:
>
> Hello Gang,
>
> I am trying to buy 2511 router. I asked for show line & show version
> output. Do you guy's see any error in the output. The seller upgraded the
> flash and failed.
>
> show line
>
> Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
> * 0 CTY - - - - - 0 0 0
> 1 AUX 9600/9600 - - - - - 0 0 0
> 2 VTY 9600/9600 - - - - - 0 0 0
> 3 VTY 9600/9600 - - - - - 0 0 0
> 4 VTY 9600/9600 - - - - - 0 0 0
> 5 VTY 9600/9600 - - - - - 0 0 0
> 6 VTY 9600/9600 - - - - - 0 0 0
>
> 3000 Bootstrap Software (IGS-RXBOOT), Version 9.14(9.b), MAINTENANCE
INTERIM
>
> SOFTWARE
> Patchlevel = 9.1(12.6)
> Copyright (c) 1986-1995 by cisco Systems, Inc.
> Compiled Fri 03-Feb-95 07:11 by chansen
>
> show version
>
> System Bootstrap, Version 4.14(9.1), SOFTWARE
>
> Router uptime is 2 minutes
> System restarted by power-on
> Running default software
> cisco 2500 (68030) processor (revision D) with 16380K/2048K bytes of
memory.
> Processor board serial number 01904229
> DDN X.25 software, Version 2.0, NET2 and BFE compliant.
> 1 Ethernet/IEEE 802.3 interface.
> 2 Serial network interfaces.
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read/Write)
> Configuration register is 0x2102
>
> Thanks
>
>
> RamG
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
