I have the following lab scenario, and I can get Phone1 to call Phone2 &
Phone3 and vice versa fine. However, I can't figure out how to make calls
between Phone2 and Phone3. I would appreciate it if anyone could give me
some tips. Thank you!
Phone1 ------ FXS -- R1 -------------------- R2 -- FXS ------ Phone2
|
FXS
|
|
Phone3
R1 Config:
voice-port 1/1/0
cptone KR
timeouts interdigit 3
!
dial-peer voice 1 pots
destination-pattern 1800512
port 1/1/0
!
dial-peer voice 2 voip
destination-pattern 5..T
session target ipv4:10.1.1.2
!
dial-peer voice 3 voip
destination-pattern 55..T
session target ipv4:10.1.1.2
R2 Config:
voice-port 1/1/0
timeouts interdigit 3
!
voice-port 1/1/1
timeouts interdigit 3
!
dial-peer voice 1 pots
destination-pattern 5512
port 1/1/0
!
dial-peer voice 2 pots
destination-pattern 55123
port 1/1/1
!
dial-peer voice 3 voip
destination-pattern ..T
session target ipv4:10.1.1.1
!
num-exp ... 1800...
Regards,
Han-Song Kim
CCNP/ MCSE/ MCDBA
[EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
