--I am trying to upgrade the IOS on a Catalyst 5000 Cisco Switch to the latest 6.1 series. I am using a CATALYST II SUPERVISOR MMF. I am trying to upgrade the IOS to 6.1 which is about 4.5 megs or better. but I fear my Flash is too low? Or is it? --Show version says 8192K available,3840K used,4352K avaialable" However shouldnt I be overwriting the 3840 used Flash also?--I keep getting TFTP and switch error messages (shown below) I am confused. Could someone please read through these log files and please help me? FIRST, When I type show version, this is what I get: "System Bootstrap Version: 2.2(2) Hardware Version: 1.0 Model: WS-C5000 Serial #: 006051071 Mod Port Model Serial # Versions --- ---- ---------- --------- ---------------------------------------- 1 2 WS-X5506 006051071 Hw : 1.0 Fw : 2.2(2) Fw1: 2.2(1) Sw : 4.4(1) 2 24 WS-X5010 003617325 Hw : 2.4 Fw : 1.1 Sw : 4.4(1) DRAM FLASH NVRAM Module Total Used Free Total Used Free Total Used Free ------ ------- ------- ------- ------- ------- ------- ----- ----- ----- 1 16384K 9905K 6479K 8192K 3840K 4352K 256K 107K 149K Uptime is 6 days, 2 hours, 23 minutes SWITCH#2 (enable)" SECOND, This is what I get when I try to run the TFTP command: "SWITCH#2 (enable) copy tftp flash IP address or name of remote host [172.26.100.1]? Name of file to copy from [cat5000-sup3.5-5-6.bin]? Download image file cat5000-sup3.5-5-6.bin is unrecognized! SWITCH#2 (enable)" THIRD: This is the TFTP Error Message: "Tue Apr 03 15:49:33 2001: Failed ( State Error ). Tue Apr 03 15:53:42 2001: Sending 'cat5000-sup3.5-5-6.bin' file to 172.26.100.2 in binary mode # Tue Apr 03 15:53:42 2001: Failed ( State Error )." ------------------------------------------------------------------------ Get your FREE download of MSN Explorer at http://explorer.msn.com _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
