----- Original Message -----
From: "Rik" <[EMAIL PROTECTED]>
> I am having difficulties getting the BR342 bridges to recognize trunked
> traffic. I have Catalyst 3500's on either side of a pair of BR342's. The
> trunks between the Cats come up just fine, but the management interfaces
on
> the wireless bridges are not available. I have tried setting addresses
from
> multiple VLANs, but the bridges just don't recognize their address in this
> fashion. I have no trouble getting to the management addresses on both
the
> near Cat and the far one, I just can't get to the bridge interfaces.
>
> Anybody have any suggestions or done this before and can share some
helpful
> hints?
>
Perhaps using 802.1q trunks and putting the addresses within the native vlan
will get around the issue.
David
David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
