Need a little help with a VPN issue. I am running a PIX 515 for VPN and it
is working just fine with cable modems, isdn, dsl etc... Problem I have is
that on the PIX side of the connection, "behind the firewall," I have some
equipment that uses push technology to push images down to the person
connected on the distant end. This push technology requires an IP address
to push to. Can anyone think of how this might be done, pushing to a user
connected via VPN with DSL, isdn, cablemodem? The remote ends are single
users in homes, not users with Cisco routers? Would very much appreciate any
advice on this.
BSites
System Engineer
Valley Health System, IS Dept.
Confidentiality Notice:
This e-mail message, including any attachments, is for the sole use of the
intended recipients and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited. If
you are not the intended recipient, please contact the sender by reply
e-mail and destroy all copies of the original message.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
