Yes you can as long as you use the mode-conditioning patch cord.
See
http://www.cisco.com/univercd/cc/td/doc/product/core/7202/fru/10901gbc.htm#x
tocid264159
Regards,
Sebastien Venturoso
CCNA CCDA
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Wednesday, April 04, 2001 12:57 PM
To: Mohamed Heeba
Cc: '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]';
[EMAIL PROTECTED]
Subject: Re: Gigabit ethernet distance limitation (off topic )
Nope. I just tried this yesterday with a 4006 and a 6509 and no go. The
Cisco reseller information states it will work with MM fiber, but the GBIC
itself actually says 1300nm fiber (SM). Here is a URL that has the info
you are looking for. (See the bottom of the chart) This URL makes it seem
like there are two LX/LH GBICs available, but I only have a part number
for one.
http://www.cisco.com/warp/public/cc/pd/si/casi/ca6000/prodlit/c60ge_ds.htm
HTH!
Ron Fuller, CCIE #5851, CCDP, CCNP-ATM, CCNP-Security, CCNP-Voice, MCNE
3X Corporation
[EMAIL PROTECTED]
Mohamed Heeba <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
04/04/2001 06:30 AM
Please respond to Mohamed Heeba
To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
cc: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
Subject: Gigabit ethernet distance limitation (off topic )
hi guys
anyone know if the LX modules can run over MM fiber ?
where can i get the distance limitation for this
thx
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
