You should have the following on your 2611 async line:
line 1 16
no exec
terminal-type vt100
transport input all
stopbits 1
flowcontrol hardware
that should do the trick.
>From: "perryb" <[EMAIL PROTECTED]>
>Reply-To: "perryb" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Subject: 2611 and reverse telnet
>Date: Wed, 4 Apr 2001 16:49:01 -0700
>
>Ok, this is embarassing but here goes...
>
>I know this has been hashed on this list, I've looked at the CCO examples,
>and I've scoured the archives. Everything seems to be in order, but the
>little bugger is still baffeling.
>
>I'm trying to connect my 2611 to other routers for reverse telnet to their
>consoles. Here is the pertinent 2611 config:
>
>interface loopback 1.1.1.10 255.255.255.255
>
>line 1 16
>no exec
>transport input all
>
>Now, when I try the reverse telent out to one of my router's console by the
>following:
>
>tel 1.1.1.10 2006 /debug
>
>Trying 1.1.1.10, 2006 ... Open
>[TN: received WILL ECHO (1)]
>[TN: sent DO ECHO (1)]
>[TN: received WILL SUPPRESS-GA (3)]
>[TN: sent DO SUPPRESS-GA (3)]
>[TN: received DO TTY-TYPE (24)]
>[TN: sent WILL TTY-TYPE (24)]
>[TN: received DO WINDOW-SIZE (31)]
>[TN: sent WILL WINDOW-SIZE (31)]
>[TN: Sent SB NAWS 100 36]
>[TN: recv SB 24 1 ]
>[TN: Sent SB 24 0 vt100]
>
>And it stays stuck right there and no further interaction allowed until I
>ctrl-shift-6-x, clear the line, and disconnect the session.
>
>A look at the router connected to line 6 indicates that this reverse telent
>never made it to the router. The router's line console config is the
>default i.e. :
>
>line console 0
>
>I need a little help on this one, I've tried many combinations and end with
>the same result.
>
>thanks
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
