Hi,
I am trying to setup a 3640 router with 3 async interfaces for reverse
telnet but it's not working.
On the 3640, I consoled in and created 8 loopback interfaces 1-8 with ip's
starting at 1.1.1.1......8.8.8.8. I have ip host R1 2001 1.1.1.1 thru ip
host R8 2008 8.8.8.8 configured.
I also have under line 33 48
#transport input all
#flowcontrol hardware
Presently, I only have 2 other routers connected to the 3640. When I type R1
on the 3640, I get a connection refused error msg. Same for R2.
I unplugged the octal connector and connected it to the second port on the
1st async interface. Same problem
I configured the other lines and plugged the octal connector to those ports.
Same problem.
Is there something that I am missing or doing wrong.
One thing that I am trying to understand is that Do I have to actually
Telnet to the 3640 and then do a reverse telnet instead of consoling into it
and trying to get to the other router's console??
Please advise.
Thank you,
Kind regards,
[EMAIL PROTECTED]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
