don`t know if this will help but try this link.
http://www.cisco.com/univercd/cc/td/doc/product/atm/c8510/12_0/12_0_18/
trouble/atm_net.htm#xtocid147060
WATCH THE WRAP...
it will give you a good starting place .....
what i think is wrong is that you either have a remote loopback on...or
there is a problem with your provider`s network .....info going nothing
coming back
HTH
steve
>From: "John P Smith" <[EMAIL PROTECTED]>
>Reply-To: "John P Smith" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: ATM OC3
>Date: Fri, 6 Apr 2001 11:46:04 +0100
>
>Does anybody have an expanation about the following show controllers atm
>output
>
> >Framer Information:
> > Framing mode: SONET OC3 STM-1
> >Facility alarm: PathFarEndRxFailure
>
>How do I find out what this alarm means
>
>
>John
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
