You must not have tried this then... I have a hundred or so 4000, 4500,
4700, & 2500 routers running in the IRS network (from DC to Ogden Utah)
running either (2) 4 Megs or (2) 8 Megs.- all reading as one partition. I
assure you, it works & I can hear the fans running in my 2511 with (2) 8
Megs sticks, loaded with 12.1(3)T.
termserv>sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-I-L), Version 12.1(3)T, RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 19-Jul-00 06:05 by ccai
Image text-base: 0x03042200, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE
SOFT
WARE (fc1)
termserv uptime is 3 days, 11 hours, 7 minutes
System returned to ROM by reload
System restarted at 01:11:41 UTC Fri Apr 6 2001
System image file is "flash:c2500-i-l.121-3.T.bin"
cisco 2511 (68030) processor (revision M) with 14336K/2048K bytes of memory.
Processor board ID 09297003, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
16 terminal line(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
What command sequence did you try ???
Phil
----- Original Message -----
From: "Rose, Jim - Contractor" <[EMAIL PROTECTED]>
To: "'Circusnuts'" <[EMAIL PROTECTED]>
Sent: Monday, April 09, 2001 9:52 AM
Subject: RE: 2 8mb flash partitions
> It will not work, the flash must be on one stick. If you have two sticks
> you can put one IOS on each, but you can not bridge over multiple sticks.
>
> I tried.
>
> Jim
>
> -----Original Message-----
> From: Circusnuts [mailto:[EMAIL PROTECTED]]
> Sent: Sunday, April 08, 2001 10:25 PM
> To: [EMAIL PROTECTED]; Fred Danson
> Subject: Re: 2 8mb flash partitions
>
>
> I believe the actual command is #no partition FLASH
>
> ----- Original Message -----
> From: "Fred Danson" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Monday, April 09, 2001 3:51 AM
> Subject: 2 8mb flash partitions
>
>
> > Hey Group,
> >
> > I noticed that one of my 2500 routers which has a total of 16mb of flash
> on
> > 2 SIMMs has the flash split up into 2 partitions. If I wanted to put an
> IOS
> > on the router which was larger than 8mb, would it work? Is it possible
to
> > span a file over multiple flash SIMMs?
> >
> > Thanks in advance,
> > Fred
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
