Not convinced!
I must admit I've never used Mzmaker, but surely it's only useful for 'Run
from RAM' routers.
Can it be used at all on a 2500?
Gareth
""Bob Timmons"" <[EMAIL PROTECTED]> wrote in message
9asg22$32a$[EMAIL PROTECTED]">news:9asg22$32a$[EMAIL PROTECTED]...
> How much RAM do you have on this router? If the uncompressed IOS is
greater
> than 8MB, you need 16MB of RAM. Remember, when you compress an IOS image
it
> will uncompress into RAM when booting. If you have 16MB of RAM, maybe try
> re-compressing the original IOS image.
>
> > I have a 2514 w/ 8Mb flash. When I used mzmaker to compress IOS 12 that
> is
> > 10MB it worked fine. However, after writing the .mz file to flash and
> > starting up the router it keeps looping "Error : memory requirements
> exceed
> > available memory
> > Memory required : 0x00AF99A0
> >
> > Exception: Software forced crash at 0x111E (PC)"
> >
> > and giving this error. Does this not work since on a 2500 series router
> > the IOS runs in the flash and not ram? Thanks.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
