Hi I need advice on the following config interface fa0/0.1 ! DHCP Server segment (Server IP = 10.1.1.254) ip address 10.1.1.1 255.255.255.0 encapsulation 10 ! interface fa0/0.2 ! Engineering Department ip address 10.1.2.1 255.255.255.0 encapsulation 20 ip helper-address 10.1.1.0 ! interface fa0/0.3 ! Accounting Department ip address 10.1.3.1 255.255.255.0 encapsulation 30 ip helper-address 10.1.1.0 ! interface fa0/0.4 ! R & D Department ip address 10.1.3.1 255.255.255.0 encapsulation 40 ip helper-address 10.1.1.0 My DHCP server will reside in VLAN 10 and all other users will reside in VLAN 20, 30 & 40 Is it possible to have the DHCP server to issue the correct IP to the respective VLANs? E.g. if VLAN 20 user power up the PC, he will get 10.1.2.5 (dynamic - as an example) and VLAN 30 user will get 10.1.3.2 (dynamic - as an example) using a single DHCP server reside in VLAN 10 Can the router or the server make the necessary config to support this? Basically i need to have different IP segment for the users in different segment Any help will be appreciated! Regards Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61&t=61 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
