IOS will send CDP  packets on physical interfaces as well as port channel
interfaces. The Catalyst 4k receiving multiple CDP neighbors
 will report the message "Not directly connected to switch" for one of the
port channel members.  This caveat may be changed in the future.


--
Richard Froom
CCIE# 5102
[EMAIL PROTECTED]
919-392-2136
""Andrew Larkins""  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I have configured the 2 internal GB connections as trunks and ether
> channels. When you enter "sho port channel" you see 2 connections to the
> layer 3 device. This seems fine. When I place the corresponding 2 GB
> connection on the layer 3 module in a port-channel, and then go back to
the
> switch and type the same command as above, I see only one connection to
the
> layer 3 module, with the second reflecting  what is shown below:
>  Shouldn't I still see both 3/1 and 3/2 connected to Gig 3 and gig 4
> respectively
> sho port channel
> Port  Status     Channel              Admin Ch
>                  Mode                 Group Id
> ----- ---------- -------------------- ----- -----
>  3/1  connected  on                      62   833
>  3/2  connected  on                      62   833
> ----- ---------- -------------------- ----- -----
>
> Port  Device-ID                       Port-ID                   Platform
> ----- ------------------------------- -------------------------
> ----------------
>  3/1  X4232L3                         GigabitEthernet3          cisco
> Cat4232L3
>  3/2   Not directly connected to switch
> ----- ------------------------------- -------------------------
> ----------------
> 4006_Switch> (enable) sho trunk
> * - indicates vtp domain mismatch
> Port      Mode         Encapsulation  Status        Native vlan
> --------  -----------  -------------  ------------  -----------
>  3/1      on           dot1q          trunking      1
>  3/2      on           dot1q          trunking      1
>
> Port      Vlans allowed on trunk
> --------
> ---------------------------------------------------------------------
>  3/1      1-1005
>  3/2      1-1005
>
> Port      Vlans allowed and active in management domain
> --------
> ---------------------------------------------------------------------
>  3/1      1
>  3/2      1
>
> Port      Vlans in spanning tree forwarding state and not pruned
> --------
> ---------------------------------------------------------------------
>  3/1      1
>  3/2      1
>
>
> Andrew Larkins
> BCom, CCNA, CCDA
> Bytes Technology Group Limited
> Tel :  +27 11 800 9467
> Fax : +27 11 800 9496
> Mobile : +27 83 656 7214
> Email :  [EMAIL PROTECTED]
> OR  [EMAIL PROTECTED]
>
>
> "This message may contain information which is confidential and subject to
> legal privilege.  If you are not the intended recipient, you may not
peruse,
> use, disseminate, distribute or copy this message.  If you have received
> this message in error, please notify the sender immediately by email,
> facsimile or telephone and return and/or destroy the original message."
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=94&t=94
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to