I'm upgrading my 5000 (Supervisor I WS-X5009) from 2.4(4) to 4.5.(8). I
checked the IOS size & type before trying to load (4 FLASH & 8 RAM), so I'm
pretty confident this part (IOS) is correct. When I load the image "Life Is
Grand," until the switch reboots to accept the new version. It seems as
though the new uploaded image has disappeared, the switch comes up in the old
version. The new image does not register in the Sho Version & Sho Flash
output. This is a Sup I, so I cannot point the switch to a particular IOS
version (though it does not appear to be in FLASH) like possible with a Sup
II's.
Any advice is welcome !!!
Thanks Everyone
Phil
PS- here is the Sho Ver
CAT5K> shv er
WS-C5000 Software, Version McpSW: 2.4(4) NmpSW: 2.4(4)
Copyright (c) 1995-1997 by Cisco Systems
NMP S/W compiled on Jan 23 1998, 11:54:52
MCP S/W compiled on Jan 23 1998, 12:14:52
System Bootstrap Version: 2.1
Hardware Version: 1.9 Model: WS-C5000 Serial #: 003627851
Module Ports Model Serial # Hw Fw Fw1 Sw
------ ----- ---------- --------- ------ ------- ------- --------------------
1 2 WS-X5009 003627851 1.9 2.1 2.1(4) 2.4(4)
2 12 WS-X5213A 006491956 2.0 1.4 2.4(4)
Module DRAM FLASH NVRAM Used Available
------ ------- ------- ------- ------- ---------
1 8192K 4096K 256K 99K 157K
Uptime is 0 day, 0 hour, 22 minutes
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=113&t=113
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
