In article , "leo"
wrote:
Well when PPP dials if should by default set the metric on the 0.0.0.0
route that's currently being used to 2 and add a new 0.0.0.0 route for
the PPP routes. This is part of the connection when you set the Use
default gateway in your dialup connection.
You question is a little unclear so if this isn't what you're after
please let me know. You can deselect this option to and add routes to
other networks you wish to access via PPP thus everything defaults to
your LAN except the main route when connected via PPP (this varies by
provider with what they advertise, do a route print to view the routing
tables).
> now,there is a nic(network interface card) in my pc(run win98 or nt),it
> has an ip address and default gateway,and I make a ppp connection,after
> I make the ppp active(dialer in remote router),the ppp also get an ip
> address and its default gateway,now my goal is: when the ppp is
> inactive,the pc should use the ip address and gateway of the nic,but
> when the ppp is active(no matter if the nic is active) how can i realize
> the goal? thanx
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html Report misconduct and
> Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=133&t=16
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
