The TFTP server will use your NIC card address. When you made changes to
your NIC TCP/IP settings, did you restart the tftp server?
Sincerely,
Peter Kurdziel
CCNA, CCDA, 1/4 CCNP (BCSN), MCSE, MCP+i
Flash: www.inotez.com
Non-Flash: www.inotez.com/index2.htm
Message Board: www.inotez.com/discus
Email: [EMAIL PROTECTED]
----- Original Message -----
From: ""Edwin Rodriguez""
Newsgroups: groupstudy.cisco
Sent: Tuesday, April 10, 2001 10:35 PM
Subject: Cisco TFTP Program??? [7:167]
> This one's been bothering me...since i did this once before on my win95
> machine..
>
> I'm trying to use cisco's tftp server program to upload a new ios to a
> router , via e0,
> however i can't figure out a way to to assign the ip address to the tftp
> program...
>
> I've tried assinging an ip address on the Nic card still no good...
>
> any ideas..
>
> TIA,
>
> Randy
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=170&t=167
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
