I agree with Brian on this one, I had the same experience with a CAT3500 and
older NIC cards. Flapping IF until I hard coded it (In my case 10/half due
to CAT3 cabling). You also might upgrade the NIC drivers to see if that
helps.
John
"Bhupinder Shergill" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am trying to configure 2948G L3 switch and fastethernet is flapping
after
> I assign IP and no shutdown on the interface.
>
> Any ideas ?
>
> Bhupinder
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=450&t=368
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
