Rick,
I think I found what your looking for....try 'show diagbus'. It has the
part numbers and serial numbers.
If you do a 'show controller cbus' that will give you hardware and microcode
versions.
Don
-----Original Message-----
From: Watson, Rick, CTR, OUSDC [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 13, 2001 10:25 AM
To: [EMAIL PROTECTED]
Subject: Trying to get interface information on 7000 [7:489]
I am trying to get information on some interface cards (i.e. serial number,
model number, etc.) on a 7000 running 11.2(14). Something similar to the 'sh
mod' command on the Catalyst series switches....can ya help me out...?
Thanks...!!
Rick Watson
Network Engineer
OUSD(Comptroller)
703.697.5710
[EMAIL PROTECTED]
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=491&t=489
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
